Hello,
I see that very often the meta desc we see in the google articles we write is different from the meta desc we write in the article editor.
It seems that Google randomly takes phrases within articles as meta desc.
What is the rea 続きを読む
Good morning,
I have installed the HubSpot extension on Outlook, but unfortunately it does not work.
When I activate the mail tracking, a new window pops up reporting the following problem (I attach a screenshot): "Operation failed. Unknown 続きを読む
Hello,
I am trying to migrate CTAs from the Legacy section to the new section. I have cloned two CTAs to do a test by using image cloning (attachment 0).
The migration was successful, but a major problem arose: the vertical CTA is cut off (at 続きを読む
Good morning,
I am asking for support to take advantage of Inbox features for lead generation. I would like to understand what are the tips, best practices, and anything that can be used for generating new leads.
For example, is it poss 続きを読む
Good morning,
I am asking for support to take advantage of Inbox features for lead generation. I would like to understand what are the tips, best practices, and anything that can be used for generating new leads.
For example, is it poss 続きを読む
Good morning,
I want to create a contact based form in Euros with different products in which you can add the quantity and which I can embed on a Wordpress page. The same logic also applies to a form in Dollars.
What should I start with? If 続きを読む
Hello, It's about Contact-Company association. I am integrating Hubspot to Salesforce. When in SF it creates an opportunity, In HS it creates a new Deal associated to the company but not to a contact. How can I associate the Deal and 続きを読む
Good morning,
I have installed the HubSpot extension on Outlook, but unfortunately it does not work.
When I activate the mail tracking, a new window pops up reporting the following problem (I attach a screenshot): "Operation failed. Unknown 続きを読む
Hello,
I am trying to migrate CTAs from the Legacy section to the new section. I have cloned two CTAs to do a test by using image cloning (attachment 0).
The migration was successful, but a major problem arose: the vertical CTA is cut off (at 続きを読む
Good morning,
I am asking for support to take advantage of Inbox features for lead generation. I would like to understand what are the tips, best practices, and anything that can be used for generating new leads.
For example, is it poss 続きを読む
Good morning,
I want to create a contact based form in Euros with different products in which you can add the quantity and which I can embed on a Wordpress page. The same logic also applies to a form in Dollars.
What should I start with? If 続きを読む
Hello,
I am trying to replicate a form created with Gravity form in HubSpot.
The aim is to have a form that allows the desired product quantity to be entered and the price to be updated at the bottom of the page (see attached screenshot).
続きを読む
A place for social media professionals to share ideas, learn, network, and be inspired.
//
//
//
//
//
(function($) {
//START END-USER CONFIGURATION
//------------------------------
//selectors for hover card triggers
var allHoverCardTriggers = '.author-name-link,.friend-list .friend a,.username a,.avatar,.user-avatar,.author-img, .authors a, .messageauthorusername a, a.lia-user-name-link, .js-latest-post-by-from a, .user-online-list li a, a.UserAvatar, .customUsersOnline a, #authors a,.dashboard-followers a.user-name, .dashboard-following a.user-name,.author-login-wrapper a, .hb-leaderboard a, .author-img-floated';
// Forward calling page's URL params to endpoint URL as well, helps with testing!
var params = (new URL(location.href)).searchParams;
var userApiUrl = '/plugins/custom/hubspot/hubspot/hovercardendpoint?' + ((params.set('user_id', '') == []._) && params.toString());
if($('.hover-card-container').length<1){
$('body').append('');
}
var cardWrapper = $('.hover-card-container');
var error = false;
var thisUserID = '';
var thisUserLogin = '';
var userLink ='';
var cardTimer;
var leaveTimer;
function mouseenter(Elem) {
var thisEl = Elem;
cardTimer = setTimeout(function(){
var docWidth = $(document).width();
var rightSide = false;
var userLink = thisEl.attr('href');
if($('.ViewProfilePage').length && $('img.lia-user-avatar-profile',thisEl).length){thisUserID = '456635';}
else if(thisEl.attr('href')=='#' || thisEl.attr('href')=='' || !userLink.match('viewprofilepage')){
return false;}
else{
var thisLen = (userLink).split('/');
thisUserID = (thisLen)[thisLen.length-1];
}
var thisCard = $('.profileCard[data-user='+thisUserID+']',cardWrapper);
var cardId = 'userProfileCard-'+ thisUserID;
var addAttr = thisEl.attr('aria-describedby',cardId);
var thisElTopOffset = Math.round(thisEl.offset().top+(thisEl.height()/2)+30);
var thisElbottomoffset = "auto";
var className = "";
var winHeight = $(window).height();
var elOffset = thisEl.offset();
var scrollTop = $(window).scrollTop();
var elementOffset = thisEl.offset().top;
var distanceTop = (elementOffset - scrollTop);
var distanceBottom = (winHeight + scrollTop) - (elOffset.top + thisEl.outerHeight(true));
var distanceLeft = Math.round(thisEl.offset().left);
var bodyHight = $('body').height();
var topParam = '';
var bottomparam = '';
var position = '';
var className = 'topArrow';
cardId
if(distanceBottom < 300 ){
if(distanceLeft < 59){
thisCard.removeClass('bottomArrow');
var className = 'leftArrow';
var distanceLeft = (distanceLeft)+(39);
var thisElTopOffset = (thisElTopOffset)-(150);
}else{
var thisElTopOffset = (thisElTopOffset)-(301); var className = 'bottomArrow'; thisCard.removeClass('topArrow');
thisCard.removeClass('leftArrow');
var distanceLeft = (distanceLeft)-(45);
}
}
else{
if(distanceLeft < 59){
thisCard.removeClass('topArrow');
var className = 'leftArrow';
var distanceLeft = (distanceLeft)+(39);
var thisElTopOffset = (thisElTopOffset)-(150);
}else{
thisCard.removeClass('leftArrow');
thisCard.removeClass('bottomArrow').addClass('topArrow');
var distanceLeft = (distanceLeft)-(45);
}
}
if(thisCard.length && $('.profileCard[data-user='+thisUserID+'] .preloader',cardWrapper).length<1){
$('.profileCard',cardWrapper).hide();
thisCard.addClass(className);
rightSide?thisCard.addClass('rightArrow'):thisCard.removeClass('rightArrow');
thisCard.delay(0).css({'top':(thisElTopOffset),'left':distanceLeft,'bottom':thisElbottomoffset}).fadeIn();
} else {
var ajaxReturn = '';
//just in case
thisCard.remove();
//hover card wrapper markup
var rightArrowClass = rightSide?'rightArrow':'';
if(thisElTopOffset != "auto"){
topParam = 'px';
}
if(thisElbottomoffset != "auto"){
bottomparam = 'px';
}
var profileCardHtml = '';
$.when(
//get the background
$.ajax({
type: 'GET',
url: userApiUrl+thisUserID,
dataType: 'html',
success: function(data) {
$('.profileCard',cardWrapper).hide();
ajaxReturn = data;
}
})
)
.done(function(){
cardWrapper.append(profileCardHtml);
$('.profileCard[data-user='+thisUserID+']',cardWrapper).eq(0).empty().html(ajaxReturn);
if($('.profileCard[data-user='+thisUserID+'] .preloader',cardWrapper).length){
$('.profileCard[data-user='+thisUserID+'] .preloader',cardWrapper).parents('div.profileCard').remove();
}
})
.fail(function(){
//uh oh - bail out!
$('.profileCard',cardWrapper).hide();
});
}
}, 360);
}
function mouseleave(e) {
clearTimeout(cardTimer);
// glowingblue: When the user leaves the hovercard trigger, wait because the leaving could be
// to interact with the hovercard, if we don't wait it will just disappear...because
// we left the trigger, right...so we'll have another handler that check if the mouse is
// over the hovercard and if so clears this timer, so the card doesn't close here
leaveTimer = setTimeout(function() {
if ($('.profileCard[data-user="'+thisUserID+'"]',cardWrapper).length) {
$('.profileCard[data-user="'+thisUserID+'"]',cardWrapper).fadeOut('fast');
} else {
$(".profileCard").fadeOut('fast');
}
}, 2400);
}
$(document).on("mouseenter focusin", allHoverCardTriggers, function(event) {
if(!($(this).parents().hasClass('custom-header'))&& !($(this).parents().hasClass('green-wrap'))){
(leaveTimer !== []._) && clearTimeout(leaveTimer);
mouseenter($(this));
event.stopPropagation();
}
});
$(document).on("mouseleave focusout", allHoverCardTriggers, function(event) {
(leaveTimer !== []._) && clearTimeout(leaveTimer);
mouseleave(event);
event.stopPropagation();
});
// glowingblue: Add handlers for when the users interacts with the hovercard, no closing!
$('.hover-card-container').on('mouseenter', function(e) {
(leaveTimer !== []._) && clearTimeout(leaveTimer);
});
$('.hover-card-container').on('mouseleave', function(e) {
(leaveTimer !== []._) && clearTimeout(leaveTimer);
if ( $(e.target).is('.profileCard[style*="block"]') ) {
leaveTimer = setTimeout(function() {
$(e.target).fadeOut('fast');
}, 2400);
}
});
// glowingblue: add one global root level click handler to also close any visible hovercards
// if the user taps/clicks outside the hovercard
$(document).on('mousedown', function(e) {
if ( !$(e.target).parents('.hover-card-container').length ) {
(leaveTimer != []._) && clearTimeout(leaveTimer);
$('.hover-card-container .profileCard[style*="block"]').each(function() {
$(this).fadeOut('fast');
});
}
});
})(LITHIUM.jQuery);
(function($) {
$(document).ready(function(){
var originalElementId;
function setCookie(cname,cvalue,exdays) {
var d = new Date();
d.setTime(d.getTime() + (exdays*24*60*60*1000));
var expires = "expires=" + d.toGMTString();
document.cookie = cname + "=" + cvalue + ";" + expires + ";path=/";
}
function getCookie(cname) {
var name = cname + "=";
var decodedCookie = decodeURIComponent(document.cookie);
var ca = decodedCookie.split(';');
for(var i = 0; i < ca.length; i++) {
var c = ca[i];
while (c.charAt(0) == ' ') {
c = c.substring(1);
}
if (c.indexOf(name) == 0) {
return c.substring(name.length, c.length);
}
}
return "";
}
function errorDisplay(errType) {
var errAuth = '