# Solution: Fix for Workflow Not Triggering Properly in HubSpot

**URL:** <https://community.hubspot.com/t/solution-fix-for-workflow-not-triggering-properly-in-hubspot/142280>\
**Category:** APIs & Integrations\
**Tags:** free\
**Created:** [November 7, 2025, 4:16pm UTC](https://community.hubspot.com/t/solution-fix-for-workflow-not-triggering-properly-in-hubspot/142280 "2025-11-07T16:16:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JLumbos](https://avatars.discourse-cdn.com/v4/letter/j/94ad74/32.png) [@JLumbos](https://community.hubspot.com/u/JLumbos)\
**Post date:** [November 7, 2025, 4:16pm UTC](https://community.hubspot.com/t/solution-fix-for-workflow-not-triggering-properly-in-hubspot/142280/1 "2025-11-07T16:16:40Z")

</div>

Hey everyone,

I wanted to share a quick fix I found after running into an issue where one of my HubSpot workflows wasn’t triggering the way I expected.

**Here’s what was happening:**  
The workflow was set up to send an internal notification when a contact filled out a form, but it didn’t seem to activate consistently.

**What I discovered and how I fixed it:**

1. I double-checked the **enrollment triggers** — the form submission field was correct, but the filter logic needed an “OR” condition instead of “AND.”
2. I verified that the workflow was **turned on** (not just saved).
3. Under the “Re-enrollment” settings, I enabled contacts to re-enroll if they filled out the form again.
4. Finally, I tested it using a new contact record instead of one that was already in the workflow.

After these adjustments, everything started working perfectly — the automation now fires every time someone submits the form.

Hopefully this helps someone else facing the same problem. HubSpot workflows are powerful, but those little settings can make a big difference!

Best,  
Jerick Lumbos

**Label:** Workflows / Automation / Forms

---

<div class="post-metadata">

**Author:** ![KBuenafe](https://avatars.discourse-cdn.com/v4/letter/k/a698b9/32.png) [@KBuenafe](https://community.hubspot.com/u/KBuenafe)\
**Post date:** [November 7, 2025, 4:40pm UTC](https://community.hubspot.com/t/solution-fix-for-workflow-not-triggering-properly-in-hubspot/142280/2 "2025-11-07T16:40:53Z")

</div>

This worked for me!