# Create Call logs using Api

**URL:** <https://community.hubspot.com/t/create-call-logs-using-api/74144>\
**Category:** APIs & Integrations\
**Created:** [January 31, 2023, 2:38pm UTC](https://community.hubspot.com/t/create-call-logs-using-api/74144 "2023-01-31T14:38:42Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![PSharma92](https://avatars.discourse-cdn.com/v4/letter/p/e19adc/32.png) [@PSharma92](https://community.hubspot.com/u/PSharma92)\
**Post date:** [January 31, 2023, 2:38pm UTC](https://community.hubspot.com/t/create-call-logs-using-api/74144/1 "2023-01-31T14:38:42Z")

</div>

![PSharma92_0-1675175178932.png](https://d2qpr2jzcazej7.cloudfront.net/original/2X/6/6891ace3d549b9aa1d0a05809a655b8958a6b6c5.png)

I am able to create the call by using the API but unable to create the call logs using API. is there an endpoint I can use to create the call log so it should look like something I highlighted in green?

Thanks 🙂

---

<div class="post-metadata">

**Author:** ![Jaycee\_Lewis](https://d10pqhm3lwygmk.cloudfront.net/user_avatar/community.hubspot.com/jaycee_lewis/32/61352_2.png) [@Jaycee\_Lewis](https://community.hubspot.com/u/Jaycee_Lewis)\
**Post date:** [January 31, 2023, 9:53pm UTC](https://community.hubspot.com/t/create-call-logs-using-api/74144/2 "2023-01-31T21:53:54Z")

</div>

Hey, @PSharma92 👋 Looking at both images, I can spot a few potential differences. Can you tell the community specifically what you cannot do via the endpoint vs. in-app? My instinct is that folks are hesitant to offer a guess or potential solution without more clarity.

Best,

Jaycee

---

<div class="post-metadata">

**Author:** ![PSharma92](https://avatars.discourse-cdn.com/v4/letter/p/e19adc/32.png) [@PSharma92](https://community.hubspot.com/u/PSharma92)\
**Post date:** [February 1, 2023, 9:08am UTC](https://community.hubspot.com/t/create-call-logs-using-api/74144/3 "2023-02-01T09:08:56Z")

</div>

Hi, Thanks for your reply.

1. When I click on the Log Call under the calls tabl of Contact. I get the following popup.

 ![PSharma92_0-1675242415739.png](https://d2qpr2jzcazej7.cloudfront.net/original/2X/4/4428d9e40d4814c4351f6e49cc84091989925a6f.png)

2. When I put values and create the data then I get the following entry in the logs.

 ![PSharma92_1-1675242445611.png](https://d2qpr2jzcazej7.cloudfront.net/original/2X/7/7ed5e6fda6a4ffbffa1e1f31b184c896a6a02e91.png)

3. When I try to create the call log using api, it creates the following. You can compare that It is different from What I am creating using the button inside hubspot.

 ![PSharma92_2-1675242482522.png](https://d2qpr2jzcazej7.cloudfront.net/original/3X/e/b/eb1da1b1d0faaf27d6b3185b8e18a294e74c2846.png)

My question is that How can i create the call log similar to I created using Log Call button using API.

Right now I am using the following API

[https://api.hubapi.com/crm/v3/objects/calls](https://api.hubapi.com/crm/v3/objects/calls)

Looking forward to your answer

Best Regards,

Nabeel Hussain

---

<div class="post-metadata">

**Author:** ![PSharma92](https://avatars.discourse-cdn.com/v4/letter/p/e19adc/32.png) [@PSharma92](https://community.hubspot.com/u/PSharma92)\
**Post date:** [February 6, 2023, 8:30am UTC](https://community.hubspot.com/t/create-call-logs-using-api/74144/4 "2023-02-06T08:30:56Z")

</div>

hi [@Jaycee\_Lewis](https://community.hubspot.com/t5/user/viewprofilepage/user-id/127074), I hope you are doing well. Is there any update?